You are paying your bank for money you have never borrowed. If that sentence surprises you, you probably have a revolving credit facility — a revolver — and have been paying a commitment fee on the undrawn balance every quarter without realizing what it buys you. It buys you the bank's promise that the money will be there when you need it. Whether that promise is worth the price, or whether a plain term loan would serve you better, comes down to one question: do you know exactly how much you need, and when?
The one-paragraph version
A term loan hands you a lump sum on day one and you pay it back on a fixed schedule until a fixed maturity date. You pay interest on the full amount from the start, whether you have spent it yet or not. A revolver hands you a credit limit you can draw, repay, and draw again for as long as the facility runs — typically three to five years. You pay interest only on what you have actually drawn, plus a smaller commitment fee on the part you have not. Term loans fit known, one-time costs. Revolvers fit fluctuating needs you cannot predict precisely.
How a term loan works
A term loan is the workhorse of business borrowing, and its structure is deliberately boring.
Lump-sum funding. The bank wires the full amount at origination. Borrow $200,000 for a delivery van fleet and the whole $200,000 lands in your account, ready to spend. This is ideal when you know the total cost upfront — equipment, an acquisition, a build-out — and wasteful when you do not, because interest starts accruing on every dollar immediately.
Fixed repayment schedule. Each payment follows an amortization schedule: part interest, part principal, with the principal share growing over time. You know your payment to the penny for the life of the loan, which makes cash-flow forecasting straightforward.
A finish line. Every term loan has a maturity date when the final payment is due. That date disciplines both sides: you get a target for becoming debt-free, and the lender gets a defined horizon for getting its capital back.
Fixed or variable rate. Fixed rates hold for the life of the loan and give you payment certainty. Variable rates — usually a benchmark such as SOFR plus a margin — often start lower but move with the market. Small-business term loans from banks and SBA lenders are commonly fixed; larger commercial term loans are commonly floating.
Heavy upfront paperwork, light ongoing monitoring. Because the lender commits the full amount on day one, underwriting is thorough: financial statements, projections, collateral appraisals, and sometimes third-party valuations. Once funded, the loan mostly runs itself — you make the payments, the balance declines, and the lender checks in far less often than it would on a revolver.
How a revolver works
A revolver behaves less like a loan and more like a high-limit credit card negotiated directly with a bank. The mechanics reward a closer look because each one affects what you pay.
Draw, repay, redraw. During the facility's life you may borrow any amount up to the limit, pay some or all of it back, and borrow again — no new application each time. A $100,000 revolver can fund $300,000 of cumulative purchases over three years if you cycle it. That reusability is the whole point.
Interest only on what you use. Draw $40,000 of a $100,000 line and you pay interest on $40,000. The undrawn $60,000 accrues no interest — but it does accrue the commitment fee described below. Interest on revolvers is almost always variable, computed on the daily outstanding balance, so your interest charge moves with both your balance and the benchmark rate.
Flexible payments. Instead of a fixed amortizing payment, revolvers typically require only a minimum payment tied to the outstanding balance, plus interest. That flexibility is a lifeline in a slow month — and a trap if you treat the minimum as the plan, because the principal never shrinks on its own.
Clean-down and term-out provisions. Many revolver agreements require you to pay the balance down to zero (or below a threshold) for a stretch — say 30 consecutive days each year. This "clean-down" proves the line funds seasonal swings rather than permanent working capital. Some facilities also "term out" the remaining balance at maturity, converting it into an amortizing term loan instead of demanding a balloon payment.
Borrowing bases and ongoing check-ins. Asset-backed revolvers limit your draws to a formula — a percentage of eligible receivables plus a percentage of eligible inventory, documented in a borrowing-base certificate you file monthly. Even cash-flow revolvers come with quarterly financial reporting and covenant tests. Expect more lender contact than a term loan demands.
The fee on money you have not borrowed
Here is the line item most borrowers overlook until it appears on a statement: the commitment fee, sometimes labeled an unused-line or facility fee. It compensates the bank for holding capital available for you — regulators require banks to reserve capital against undrawn commitments, so your unused line has a real cost to the lender even when it costs you nothing in interest.
How it runs. The fee is an annual rate applied to the average daily undrawn balance, billed quarterly in arrears. Typical rates run 0.25% to 1.00% per year, with most small-business facilities landing between 0.25% and 0.50%. Investment-grade borrowers pay the low end; smaller or riskier borrowers pay more.
What it costs in practice. Take a $100,000 revolver at a 0.50% commitment fee with an average drawn balance of $40,000 through the quarter. The undrawn average is $60,000, so the quarterly fee is roughly $60,000 × 0.50% ÷ 4 = $75. That $75 buys you instant access to the other $60,000 all quarter — cheap insurance if your cash flow is lumpy, pure overhead if you never draw at all.
Other fees to expect. Origination or arrangement fees (often 0.5% to 1% of the commitment) are due at closing. Some lines add an annual facility fee on the total commitment regardless of usage, and drawing through a letter-of-credit sublimit carries LC fees near the drawn interest margin. When comparing offers, add every fee to the interest before judging which line is cheaper — a low margin with a high commitment fee can lose to the reverse if you draw lightly.
Side by side
| Term loan | Revolver | |
|---|---|---|
| Funding | Lump sum at closing | Draw as needed up to a limit |
| Reuse | No — repay and it is gone | Yes — repay and redraw freely |
| Interest base | Full principal from day one | Drawn balance only, daily |
| Rate | Often fixed for small business | Almost always variable |
| Payments | Fixed amortization | Minimums tied to balance |
| Extra fees | Origination, closing, sometimes prepayment penalties | Commitment fee on undrawn, facility and LC fees |
| Best for | Known one-time costs | Fluctuating working capital |
| Lender monitoring | Heavy at origination, light after | Continuous: covenants, certificates, reviews |
Committed vs. uncommitted: read the fine print
Not every credit line is a promise. A committed facility contractually obligates the bank to fund your draws (assuming you are in compliance with the covenants), and the commitment fee is the price of that obligation. An uncommitted or discretionary line lets the bank decline any draw — typically offered without a commitment fee, but also without any guarantee the money appears when you need it most. For a seasonal business bridging to a peak-selling quarter, that distinction is everything: an uncommitted line that vanishes in a downturn is not a safety net. Confirm which kind you are signing, and treat the commitment fee on a committed line as the cost of certainty rather than a junk fee to negotiate to zero.
How each loan lands on your books
The accounting follows a simple principle: record what you owe, not what you could owe.
A term loan is straightforward. The funded amount is a liability from day one, split on the balance sheet between the current portion (principal due within twelve months) and the long-term remainder. Each payment reduces the liability and records interest expense.
A revolver is only slightly more complex. Draws increase the liability; repayments decrease it. The undrawn capacity never touches the balance sheet — it is disclosed in the footnotes if material, not booked. The commitment fee is a period expense, recorded when incurred like any other bank fee, and it is generally deductible as an ordinary business expense when the line supports your operations.
Tracking the two in separate liability accounts keeps draws, repayments, and fees from tangling. Here is how a quarter of activity looks in a plain-text ledger, with the term loan and the revolver kept apart and the commitment fee under its own expense account:
2026-01-01 open Assets:Business-Checking USD
2026-01-01 open Liabilities:Term-Loan:Bank USD
2026-01-01 open Liabilities:Revolver:Bank USD
2026-01-01 open Expenses:Interest:Debt USD
2026-01-01 open Expenses:Bank-Fees:Commitment USD
2026-01-01 open Equity:Opening-Balances USD
2026-01-05 * "Term loan funded" "60-month amortizing note"
Assets:Business-Checking 200000.00 USD
Liabilities:Term-Loan:Bank
2026-02-03 * "Revolver draw" "Seasonal inventory build"
Assets:Business-Checking 40000.00 USD
Liabilities:Revolver:Bank
2026-03-31 * "Quarterly commitment fee" "0.50% annual on undrawn balance"
Expenses:Bank-Fees:Commitment 75.00 USD
Assets:Business-Checking
2026-03-31 * "Revolver interest" "March interest on drawn balance"
Expenses:Interest:Debt 283.33 USD
Assets:Business-Checking
2026-04-15 * "Revolver repayment" "Receivables collected, pay down line"
Liabilities:Revolver:Bank -40000.00 USD
Assets:Business-CheckingIf you keep your books this way, two reports answer most lender questions at a glance: the liability balances show exactly what you owe on each facility, and the fee and interest accounts show your true cost of borrowing. A dashboard view of those accounts — the kind of trend chart Fava draws from the same ledger file — also makes covenant season far less stressful, because you can see leverage drifting toward a limit months before the bank does. The mechanics of organizing accounts this way are covered in the documentation.
Mistakes that cost borrowers real money
Funding working capital with a term loan. Borrowing a lump sum to cover a seasonal gap means paying interest on the peak amount all year, including the months the cash sits idle. If the need rises and falls, it belongs on a revolver.
Funding permanent needs with a revolver. The mirror image: a balance that never clears and rolls year after year is not working capital, it is long-term debt wearing a variable rate. Most lenders eventually force the issue through a clean-down clause. Term it out yourself before they do — term debt is usually cheaper for money you never repay.
Ignoring the covenants. Revolvers carry financial covenants — maximum leverage, minimum interest coverage — tested every quarter. Breaching one can freeze your ability to draw, which tends to happen exactly when you need the line most. Model each quarter's covenant headroom before you draw, not after.
Forgetting the clean-down. Missing a required pay-down period is a technical default even if every payment was on time. Calendar the window and plan receivables collection around it.
Comparing rates without fees. A revolver quoted at SOFR plus 2.50% with a 0.50% commitment fee can cost more than SOFR plus 3.00% with a 0.25% fee if you draw lightly. Run both offers against your actual expected utilization before choosing.
Which one fits your need
Match the instrument to the shape of the need, not to whichever offer arrived first:
- You know the amount and the date — a $180,000 oven line, a $60,000 truck. Take the term loan. Amortization turns a known cost into a known payment.
- The need swells and shrinks — inventory builds ahead of the holidays, receivables bunch up in slow-paying industries. Take the revolver. Pay interest on the peak only while the peak lasts.
- The need is permanent but you want flexibility on timing — an acquisition closing in stages. Ask about a delayed-draw term loan: multiple draws like a revolver, but each draw amortizes like term debt with no redraw.
- You want a backstop you may never touch — a cushion against a late-paying anchor client. A committed revolver you rarely draw is the cheapest standby insurance in business lending; the commitment fee is the premium.
- You need both — most growing businesses do. Term debt for the equipment, a revolver for the cycle, each tracked in its own account so you always know which dollar costs what.
Start by pulling your last twelve months of bank balances and marking the months you would have drawn. If the chart shows a flat line, price a term loan. If it shows waves, price a revolver — commitment fee included — and read the covenants before you sign.





