Skip to main content

Dext vs. Hubdoc vs. AutoEntry: Which Receipt-Capture Tool Fits a Small Business

Published Last updated 13 min readMike ThriftMike Thrift
Dext vs. Hubdoc vs. AutoEntry: Which Receipt-Capture Tool Fits a Small Business
On this page

It is the 28th of the month, and your inbox holds 200 supplier receipts, your glovebox holds 40 more, and your bookkeeper holds one firm opinion: none of it is getting entered before month-end unless something changes. So you do what every small business does in 2026 — you point a capture app at the pile and let software read the paper. Three names own that shortlist: Dext, Hubdoc, and AutoEntry. All three photograph receipts and extract the numbers, but they charge you in three completely different ways, they read to three different depths, and each one quietly assumes you run a particular accounting system. Pick the wrong one and you pay twice: once for the subscription, and again in the cleanup hours the tool was supposed to eliminate.

This post compares the three on the four things that decide the purchase: how deep the extraction goes, what each one really costs at your volume, which accounting software each favors, and what the bookkeeping looks like once captured documents start flowing into your ledger.

What each tool actually is​

Dext (formerly Receipt Bank) is the reference platform for outsourced receipt capture. You snap, email, or upload receipts, invoices, and bank statements; it extracts the data, including line-item detail, and publishes to more than 30 accounting systems. It is the Switzerland of this comparison: it integrates with QuickBooks, Xero, and Sage without favoring any of them, which is exactly why bookkeeping firms that serve clients on mixed software standardize on it. The trade-off is that everything about Dext is a paid tier with metered extras.

Hubdoc is Xero's own capture tool, and its pricing story is one sentence long: it is free with every paid Xero plan. Snap or email a receipt and it publishes to Xero with the image attached. The trade-off is depth. Hubdoc reads header-level data only — supplier, date, total, invoice number — and extracts no line items at all, on any tier, at any price. Xero has said full line-item extraction for Hubdoc is not in its pipeline, so treat that ceiling as permanent, not as a roadmap delay.

AutoEntry is Sage's capture tool, and it is built around a different billing idea: credits instead of seats. Every plan includes the same features and unlimited users; only the credit allowance changes. A standard receipt or invoice costs one credit, line-item extraction doubles it, and bank statements cost more per page. It is Sage-first — Sage Accounting and Sage 50 get the most natural fit — while also publishing to QuickBooks, Xero, and FreeAgent.

Extraction depth: header data vs. line items​

The single most important difference between these tools is how far down the receipt they read, because depth decides how much of your bookkeeper's job is actually automated.

A header-only capture reads the supplier name, the date, and the total, then books the whole invoice to one account. That is fine for a coffee receipt. It is not fine for a $400 office-supply invoice that is really $68 of paper, $190 of toner, and $142 of a chair that belongs on the balance sheet as a fixed asset — one account gets all three, and someone fixes it by hand or not at all. Hubdoc stops at the header, always. If your supplier invoices routinely mix categories, Hubdoc's free price comes with a monthly invoice of labor.

Dext extracts line items, but rations them. The business plan includes just 5 line-item documents a month; beyond that you pay per document (about $0.50 each) or buy a monthly extraction bundle (from about $20.50 a month). Bank-statement extraction is metered separately too. Dext's depth is real, but the meter runs on exactly the documents where depth matters most.

AutoEntry also extracts line items, priced at 2 credits per invoice instead of 1 — a clean doubling you can model in advance. Supplier statements cost 2 credits each, and bank or card statements cost 3 credits per page. There is no separate add-on to buy; the credit price already includes whatever depth you choose per document.

The practical question is what share of your documents actually needs lines. A freelancer with card receipts and a handful of supplier bills may need line detail on one invoice in ten — header capture plus occasional manual splits wins. A retailer or contractor whose supplier invoices mix inventory, materials, and equipment needs lines on most documents, and a header-only tool just moves the typing from the receipt to the correction journal.

Pricing: one subscription, one freebie, one meter​

Advertised prices undersell the real cost on all three, in different directions. Here is the honest version, checked against third-party captures of 2026 vendor pricing — confirm the live page before you buy, because every vendor here reprices regularly.

Dext runs about $25.21 a month billed annually ($302.50 a year) for 250 documents and 5 users, or about $31.50 a month on monthly billing. That covers capture and publishing, plus the 5 included line-item documents. The extras stack quickly: line-item and supplier-statement extraction from $20.50 a month or $0.50 a document, bank-statement extraction from $13 a month or $0.32 a document, and an AI Assist add-on around $10.50 a month. There is no single-user tier — a solo shop pays for 5 seats and 250 documents whether it uses them or not — and there is a 14-day free trial.

Hubdoc costs nothing beyond your Xero subscription, with unlimited usage on every Xero plan. Not on Xero? A standalone plan runs about $12 a month and publishes to QuickBooks Online and Bill.com as well. Either way, the price is flat and the depth is fixed: header data, no lines, no upsell that changes that.

AutoEntry starts around $13 a month for 50 credits (UK: £15.45 for 50) and scales to around $469 a month for 2,500 credits, with every plan carrying unlimited users and unlimited client companies. Unused credits roll over for 90 days, which softens seasonal swings. The price you pay is a function of your document mix: 1 credit per ordinary invoice or receipt, 2 with line items, 2 per supplier statement, 3 per bank-statement page.

Run the math on a realistic month — 60 supplier invoices, half needing line-item detail. On AutoEntry that is 30 × 1 plus 30 × 2, or 90 credits: past the 50-credit entry plan, worth roughly $23 at entry-plan per-credit rates, before any bank statements. On Dext the 60 documents fit easily inside the 250 allowance, but 30 line-item documents against 5 included means 25 extra at $0.50 each — about $12.50 on top of the $25.21 base, or roughly $38 before bank extraction. On Hubdoc the same month costs $0 extra and produces 30 invoices booked to single accounts, with someone keying the lines by hand. There is no universally cheapest option; there is only the cheapest option for your mix, and the mix is the part most buyers never measure.

Integrations: each tool assumes your ledger​

Capture tools live or die by the publish step — the moment extracted data lands in your accounting software with the image attached. Here each vendor's ownership shows.

Dext is the neutral choice. With 30-plus accounting integrations spanning QuickBooks, Xero, Sage, and FreeAgent, it publishes the same way no matter which ledger you run. If you use QuickBooks, or you run a firm with clients on several systems, or you might switch systems next year, neutrality is a feature worth paying for.

Hubdoc is the Xero-native choice. It publishes natively to Xero and also supports QuickBooks Online and Bill.com, but there is no CSV fallback for anything else, and the free bundling is a Xero-only perk. A Xero shop gets capture with zero new logins and zero new bills. A non-Xero shop gets a $12 header-only tool competing against full-depth alternatives at similar money — a much weaker proposition.

AutoEntry is the Sage-first choice. Sage owns it, and Sage Accounting and Sage 50 get the tightest fit, including learned coding rules that improve as you approve. QuickBooks, Xero, and FreeAgent are supported publishes too, so a non-Sage shop can use it — but then the reason to choose it is the credit billing, not the integration.

One integration-adjacent detail matters for all three: none of them replaces your bank feed. Capture tools read documents; your bank connection imports transactions. The month-end workflow is matching the two — the captured invoice against the imported payment — and whichever tool you choose, that reconciliation step stays yours.

The bookkeeping: recording the tool and what it captures​

Whichever tool you choose, it creates bookkeeping in two directions: the subscription going out, and the captured documents coming in. Get both right and month-end gets shorter; get either wrong and the capture tool just digitizes the mess.

The subscription is straightforward but easy to mistime. A monthly plan is a current-month software expense. An annual plan paid upfront is a prepaid asset amortized over twelve months — expensing the whole year in January torpedoes one month's profit and understates the other eleven. Track capture software under its own expense account, not lumped into general software, so you can compute true cost per document each month: total capture spend divided by documents processed. That is the number that tells you whether the $38 Dext month or the 90-credit AutoEntry month was actually cheaper.

The captured documents are where line-item depth pays its rent. A header-only capture books the whole supplier invoice to one account; a line-item capture splits it the way your reporting needs. Here is the pattern in a plain-text ledger for a $258.39 office-supply invoice that mixes consumables with equipment, plus the month's capture subscription. The beancount.io docs cover the mechanics if any of these postings are new to you:

2026-01-01 open Assets:Cash:Operating USD
2026-01-01 open Liabilities:AccountsPayable USD
2026-01-01 open Expenses:Software:Capture USD
2026-01-01 open Expenses:Office:Supplies USD
2026-01-01 open Expenses:Office:Equipment USD
 
2026-02-01 * "Dext" "February receipt-capture subscription"
  Expenses:Software:Capture  25.21 USD
  Assets:Cash:Operating  -25.21 USD
 
2026-02-14 * "Office Depot" "Printer paper, toner, chair"
  Expenses:Office:Supplies  68.40 USD
  Expenses:Office:Equipment  189.99 USD
  Liabilities:AccountsPayable  -258.39 USD
 
2026-02-20 * "Office Depot" "Pay February supply invoice"
  Liabilities:AccountsPayable  258.39 USD
  Assets:Cash:Operating  -258.39 USD

Two details make this worth doing as documents arrive rather than at tax time. First, recording the invoice when captured — not when paid — keeps accrual-basis books honest: the liability exists from the invoice date, and cash-basis thinkers who book on payment systematically understate what they owe mid-month. Second, splitting lines at capture time is nearly free, while re-splitting from a header-only posting in April means reopening every invoice. That rework is the hidden price of free capture, and for document mixes heavy on mixed-category invoices, it dwarfs any subscription fee.

Common mistakes when choosing​

Choosing on the sticker price. Free, $13, and $25 are the costs of three different products, not three prices for the same one. Model each tool at your actual monthly mix — document count, share needing lines, bank-statement pages — and the ranking often inverts. The buyer who needs lines on half their invoices and picks the free header-only tool did not save $25 a month; they bought a part-time data-entry job.

Ignoring the line-item multiplier. On AutoEntry every line-item invoice costs double; on Dext the sixth line-item document in a month starts a meter. Count your mixed-category invoices before you commit. If fewer than 5 a month need lines, Dext's included allowance covers you and the headline price is real. If most need lines, price the bundles, not the base.

Leaving auto-publish on before coding stabilizes. Every tool here can publish straight to your ledger without review. That is wonderful once supplier coding rules have settled and dangerous before: errors slip through unreviewed, and finding them later costs more than the review ever did. Run new suppliers through manual approval until their coding repeats correctly, then automate.

Forwarding only some invoices to the capture inbox. The tool reads what you send it. Sending supplier invoices to the capture inbox while filing others manually splits your audit trail across two systems — half the invoices have images attached in the ledger, half live in a folder nobody opens. Pick one intake and route everything through it.

Trusting extracted figures blindly. Extraction accuracy in the mid-90s still means a few documents per hundred carry a misread total or tax figure, and a wrong number published straight to the ledger becomes a wrong return. Always sanity-check the math — totals against lines, tax against rate — before anything posts. The review pass is minutes; the amended filing is weeks.

Never exporting. Your capture tool holds your document archive. Keep your own backup outside it: export images and data periodically, because switching tools without your history means rebuilding years of audit evidence from email threads.

Which one fits your small business​

Choose Dext if line-item detail matters and your software mix is mixed or undecided. Its neutral integrations across QuickBooks, Xero, and Sage, plus genuine line-item extraction, make it the strongest default for businesses with real document volume and for anyone serving clients on more than one ledger. Accept the metered extras by pricing the bundles against your mix upfront — and trial it on a real month of receipts, counting how many documents actually need lines, before you commit to a year.

Choose Hubdoc if you run Xero and your documents are simple. Header-level capture at zero marginal cost is unbeatable for card receipts, clean supplier bills, and light volume — the tool disappears into the subscription you already pay. Accept the ceiling honestly: no line items, ever. The day your invoices routinely mix categories is the day free stops being cheap.

Choose AutoEntry if you run Sage or your volume swings month to month. Sage-first publishing plus credit billing that flexes with the workload — and unused credits rolling over 90 days — fits seasonal businesses and growing firms better than any fixed tier. Accept the credit arithmetic by modeling your mix first: count the line-item invoices and bank-statement pages, double and triple them respectively, and buy the allowance your busiest month needs.

Whichever you pick, do the one-month audit before you buy a year: run a real month of documents through the trial, count what share needed line items, and price all three at that mix. The cheapest receipt-capture tool is rarely the one with the lowest starting price — it is the one whose depth matches your documents and whose billing model matches how your volume moves.

Source: https://beancount.io/blog/2026/11/13/dext-vs-hubdoc-vs-autoentry-receipt-capture-tool-small-business-guide

Published: November 13, 2026

Last updated: November 14, 2026