# Piano Tuning and Instrument Repair Shop Bookkeeping: Flat-Rate Session Pricing, Parts Inventory, and Why Most Technicians Underprice a House Call

A piano tuning at \$140 where the next piano is 8 miles away pays. The same \$140 where the next piano is 38 miles away pays for gas and windshield time. The difference is not the hammer — it is the route, and your books must see it.

## Flat-Rate vs. Hourly: Why Flat-Rate Wins for House Calls

Piano work is sold per job — a tuning, a pitch raise and tuning, a regulation, a voicing — each with a flat rate. Hourly billing invites the customer to watch the clock; flat-rate lets you price the outcome.

**The flat rate must carry three things:**

- **Bench or on-site labor:** Tuning time (60–90 minutes), plus regulation and repair if quoted.
- **Drive time and mileage:** Track both. A 30-mile average at \$0.72 is \$21.60 mileage plus 50 minutes at \$30 loaded = \$25.00 drive labor.
- **Parts:** A bass string replacement kit at \$18, a damper felt set at \$22. Consumables that are not tracked by job become invisible COGS.

Build the rate from the job cost, not from the local competitor. If a tuning costs \$55 in loaded time and parts on a dense route and \$78 on a sparse route, the flat rate must be set for the route you actually have.

## Parts Inventory: The Drawer of Small Values That Adds Up

Piano shops carry hundreds of small parts — strings, pins, felts, action parts — each a few dollars but collectively \$2,000–\$5,000 in inventory. Track them:

- **Purchase:** `Dr Inventory — Piano Parts $400` / `Cr Cash $400`
- **Use per job:** `Dr COGS — Parts $18` / `Cr Inventory — Parts $18`
- **Shrinkage:** The small parts that walk out in a pocket or break. Count quarterly.

Without parts inventory, a \$140 tuning looks like \$140 revenue and \$30 labor; with it, the \$18 string and the \$8 overhead are part of the job, and margin is honest.
